Full Body Decals for Yamaha MT 15
Price range: ₹2,199.00 through ₹3,199.00
Product description
Completely tailored sticker kit for YAMAHA R15 V3 series consists of six which has been completely designed . It is printed on the high-gloss sticker sheet and die cut for a more precise application INSTALLATION INSTRUCTIONS OLD DECAL REMOVALUse a blow dryer or heat gun to heat older decals and help peel them off. For any remaining glue you can still heat up a bit and rub off or use goo gone, rubbing alcohol or any similar residue/glue remover. GRAPHICS KIT INSTALLATION INSTRUCTIONS:Tools Needed: Squirt bottle with water, squeegee (old credit card works well), soft cloth and scissors, heat gun or blow dryer. Install in room temperature. Do not rush the install.
Features
Thoroughly clean all surfaces with soap and water and remove all old adhesive, dirt, lint, oils etc. Rinse well with plain water and dry with lint-free cloth. Use rubbing alcohol or Goo Gone for any residue of old adhesive. Heating up old adhesive also helps in removal. If you use Goo Gone make sure you clean your plastics again with soap and water.
Before removing decal backing, hold decals up to to your vehicle to get a general idea of how the graphics should look and where all the pieces go.
Wrap a soft, lint free cloth around your squeegee.
Spray the plastic you are going to work on first with water. Coat the entire outside surface.
Slowly peel the backing from the decal piece, and as you peel, spray light mist of water to the adhesive side of the decal.
Lightly set the decal onto the plastic making sure everything lines up properly. Start at one end of the decal and squeegee the water out of the other end.
Use heat just enough to soften the vinyl for intricate curves. When using a heat gun or blow dryer be careful not to burn the kit.
Guarantee safe & secure checkout
Description
Full Body Decals for Yamaha MT 15
Product description
Completely tailored sticker kit for YAMAHA R15 V3 series consists of six which has been completely designed . It is printed on the high-gloss sticker sheet and die cut for a more precise application INSTALLATION INSTRUCTIONS OLD DECAL REMOVALUse a blow dryer or heat gun to heat older decals and help peel them off. For any remaining glue you can still heat up a bit and rub off or use goo gone, rubbing alcohol or any similar residue/glue remover. GRAPHICS KIT INSTALLATION INSTRUCTIONS: Tools Needed: Squirt bottle with water, squeegee (old credit card works well), soft cloth and scissors, heat gun or blow dryer. Install in room temperature. Do not rush the install.
Features
Thoroughly clean all surfaces with soap and water and remove all old adhesive, dirt, lint, oils etc. Rinse well with plain water and dry with lint-free cloth. Use rubbing alcohol or Goo Gone for any residue of old adhesive. Heating up old adhesive also helps in removal. If you use Goo Gone make sure you clean your plastics again with soap and water.
Before removing decal backing, hold decals up to to your vehicle to get a general idea of how the graphics should look and where all the pieces go.
Wrap a soft, lint free cloth around your squeegee.
Spray the plastic you are going to work on first with water. Coat the entire outside surface.
Slowly peel the backing from the decal piece, and as you peel, spray light mist of water to the adhesive side of the decal.
Lightly set the decal onto the plastic making sure everything lines up properly. Start at one end of the decal and squeegee the water out of the other end.
Use heat just enough to soften the vinyl for intricate curves. When using a heat gun or blow dryer be careful not to burn the kit.
Additional information
| Weight | 1 lbs |
|---|---|
| COLOUR | 1, 2, 3, 4, 5 |
Quick Comparison
| Full Body Decals for Yamaha MT 15 remove | Shocker Protector for motocycles remove | MT15 CHAIN COVER remove | Saddle Stay for MT15 remove | Lever Protector Economy Type 1 remove | Bend Pipe for R15 V3 /V4 BS6 /MT15 remove | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Full Body Decals for Yamaha MT 15 remove | Shocker Protector for motocycles remove | MT15 CHAIN COVER remove | Saddle Stay for MT15 remove | Lever Protector Economy Type 1 remove | Bend Pipe for R15 V3 /V4 BS6 /MT15 remove | ||||||||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||||||||
| SKU | 80393 | 9031803 | 9031542 | 80418 | 80519 | 80498 | ||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||
| Price | Price range: ₹2,199.00 through ₹3,199.00 | Original price was: ₹1,799.00.₹1,399.00Current price is: ₹1,399.00. | Original price was: ₹1,099.00.₹699.00Current price is: ₹699.00. | ₹1,999.00 | Original price was: ₹599.00.₹299.00Current price is: ₹299.00. | Price range: ₹1,799.00 through ₹1,999.00 | ||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||
| Weight | 1 lbs | 1 lbs | 1 lbs | 3 lbs | N/A | N/A | ||||||||||||||||||||
| Dimensions | N/A | N/A | 40 × 35 × 50 in | N/A | N/A | N/A | ||||||||||||||||||||
| Additional information |
|
|
|
|
|
| ||||||||||||||||||||
| Description | Product description Completely tailored sticker kit for YAMAHA R15 V3 series consists of six which has been completely designed . It is printed on the high-gloss sticker sheet and die cut for a more precise application INSTALLATION INSTRUCTIONS OLD DECAL REMOVALUse a blow dryer or heat gun to heat older decals and help peel them off. For any remaining glue you can still heat up a bit and rub off or use goo gone, rubbing alcohol or any similar residue/glue remover. GRAPHICS KIT INSTALLATION INSTRUCTIONS: Tools Needed: Squirt bottle with water, squeegee (old credit card works well), soft cloth and scissors, heat gun or blow dryer. Install in room temperature. Do not rush the install.Features Thoroughly clean all surfaces with soap and water and remove all old adhesive, dirt, lint, oils etc. Rinse well with plain water and dry with lint-free cloth. Use rubbing alcohol or Goo Gone for any residue of old adhesive. Heating up old adhesive also helps in removal. If you use Goo Gone make sure you clean your plastics again with soap and water. Before removing decal backing, hold decals up to to your vehicle to get a general idea of how the graphics should look and where all the pieces go. Wrap a soft, lint free cloth around your squeegee. Spray the plastic you are going to work on first with water. Coat the entire outside surface. Slowly peel the backing from the decal piece, and as you peel, spray light mist of water to the adhesive side of the decal. Lightly set the decal onto the plastic making sure everything lines up properly. Start at one end of the decal and squeegee the water out of the other end. Use heat just enough to soften the vinyl for intricate curves. When using a heat gun or blow dryer be careful not to burn the kit. | Compatiblity - R15 V3/ R15 V4/ R15 M/ MT-15/Apache rr310/BMW 310rr/Duke gen 3Aluminum Alloy Material by CNC. Best in term of quality and reliability. This Product is sporty design and add aesthetic touch to your Ride Soul. | Features Compatibility- MT 15 Dustproof, aging resistant, weather resistant Easy to install and disassemble, easy to maintain | Enhance the safety of your bike with our Economy Type 1 Lever Protector. Crafted for durability and functionality, this lever protector provides an affordable yet reliable solution. Find it at our online store in JAIPUR, India, for a practical addition to your motorcycle. Shop now for top-notch accessories tailored to your biking needs. Make your purchase locally in JAIPUR for superior bike safety without breaking the bank.Features Time to protect your vehicle’s levers from Crash.This lever protector is designed and built after complete R&D by our team. This Product is sporty design and add aesthetic touch to your Ride Soul | Upgrade your bike's performance with a Bend Pipe designed for R15 V3, V4 BS6, and MT15, available at our online store in JAIPUR, India. Explore our collection for a perfect blend of quality and enhanced exhaust dynamics. Conveniently located near you, our store ensures quick delivery to enhance your riding experience effortlessly. Elevate your bike's sound and style – order the Bend Pipe now and ride confidently through the vibrant streets of JAIPUR! FeaturesThis bendpipe is designed and built after complete R&D by our team. It is made of Stainless Steel 304 Grade, completely rust free and is one of the best in terms of quality. | |||||||||||||||||||||
| Add to cart |
Reviews
There are no reviews yet.